Bathroom issues can be quite stressful to handle by yourself. Whether it be a busted toilet or a leaky faucet, any problems that require plumbing repairs can be quite troublesome, especially if you’ve had no prior experience handling such problems.

Nevertheless, it’s important to understand that it isn’t the end of the world when you encounter issues in the bathroom. In fact, there are ways for you to resolve these problems without having to go to a plumber. 

In this article, we will teach you how to deal with a common plumbing problem in hopes of helping you learn about plumbing repairs. If this is something you’re interested in, we will now break down the guide on preventing and fixing clogged drains!

Preventing Clogged Drains

While it’s important to know the basics of how to fix the issue, it will be great to prevent the issue from ever occurring in the first place. Here are a few things to remember when it comes to preventing clogged drains:

  • Be sure to keep food, coffee grounds, and grease away from your kitchen sink. Leftover food is best disposed of in the trash and not the garbage disposal.
  • Install a shower drain catcher to prevent hair from clogging your drains.
  • Refrain from flushing items down the toilet. Even small items like dental floss can still end up clogging your toilet.

Fixing Clogged Drains

Sometimes, drains will just get clogged regardless of how careful you are. But before you call a professional to remedy the situation, you can try and fix the problem yourself first. This is because basic plumbing repair should be manageable even for people with minimal or no experience. Here are a few ways you can try to fix your clogged drains:

1. Use a Plunger 

Before you try anything else, a plunger is usually a good first method to unclog drains. All you have to do is to cover the drain with the plunger and then start pushing in and out. This’ll help force water to move up and down through the pipes and hopefully remove the blockage from the drain. If you’re going to be doing this in the sink, be sure to let the water run a little before you start using the plunger.

2. Use a Drain Cleaner

If the plunger doesn’t do the trick, then you may want to consider using a drain cleaner. While chemical drain cleaners are readily available, you’d be glad to know that a more eco-friendly homemade version exists that can be just as effective. All you have to do is to pour ½ cup of baking soda, followed by a ½ cup of vinegar down the drain. Let the solution sit for around an hour, and then pour boiling water down the drain. Then, repeat this as many times as needed.

3. Use a Plumbing Snake

If all else fails, you can resort to using a plumbing snake or auger. A plumbing snake is a long and flexible cable that you insert in a drain to physically remove the obstruction that is causing the clog. All you have to do is push the wire down into the drain and navigate it down the pipes until you reach the obstruction. From there, you’ll need to wrangle the blockage out. However, this could vary in difficulty depending on the nature of the obstruction.

Conclusion

Hopefully, this article will help you when it comes to dealing with clogged drains. Remember that you don’t have to do everything yourself. If things get too difficult, it would be best to call in professionals to prevent any further complications. 

If you’re looking for professional plumbing maintenance in Edmonton, then the experts at Capital Plumbing and Heating are your best bet. Don’t hesitate to reach out for any plumbing issues and get in touch with us today to learn more about our services!