The sump pump in your home is one of the most crucial home plumbing fixtures. They ensure that flood occurrences are prevented in your basement. This often happens when there is too much snow or too much rainfall. Edmonton receives abundant rainfall every year; it is best to undertake these DIY sump pump maintenance tricks to keep your system running effectively.

Check for Debris

Sediments and contaminants are most likely to settle near your sump pump. To check for such debris, you can use a flashlight. Use it into the pit where the pump is located and get rid of any such debris. Debris accumulation can affect the performance of your sump pump. Clearing the waste in and around the sump pump is one of the critical steps in sump pump maintenance to keep its smooth functioning intact.

Inspect the Check Valve

The sump pump check valve ensures that the water does not re-enter the pump once it has shut off. It also ensures that the water doesn’t flow back into your basement that the sump pump has pumped out. To ensure that this valve is working properly, check the water outlet pipe and look for an arrow. The arrow has to be pointing away from your sump pump.

Undertake Routine Cleaning Schedule

Routine cleaning for every plumbing fixture is essential to avoid disturbance in their functions. You need to clean out the relief hole and the impeller at regular intervals. To locate the relief hole, look for a small opening between the sump pump discharge and check valve. You can either use a toothbrush or any cotton swab to clean this area. You can locate the impeller attached to the sump pump. It is a filtering device that can easily get clogged and should be cleaned every month. These routine cleaning can help in your sump pump maintenance.

Use Backup Power Source

The sump pump runs on electricity. If there is a power cut due to various reasons, the sump pump may stop working too. To keep it running, you need to have a backup power supply. If your home experiences a power outage during heavy rainfall and you do not have a backup power supply, it can lead to significant flooding. One of the easiest ways to avoid this is to use a backup battery on your sump pump.

Apart from this, it is essential to test your sump pump. You can do this by pouring about 3 gallons of water into the pit. The sump pump should start automatically and suck out the water. To keep your sump pump running smoothly, you should undertake professional maintenance every three to four months and undertake comprehensive care once a year. If you require expert sump pump maintenance assistance, you can consider Capital Plumbing and Heating. We are a team of experienced professionals who ensure every plumbing fixture functions effectively to keep you away from trouble. Feel free to contact us to know more about this maintenance.