Sump pumps are an incredible device that protects your house against water damages during adverse weather conditions. From eliminating the excess water in crawlspace, basements, or around the foundation to transporting it away from the house, they have a definite purpose.

But if you have a device installed in your house already, it’s time to ensure that it’s working correctly. This calls for the right time to test your sump pump so that it can keep your properties safe from water damage for another five to ten years.

Fortunately, you don’t need to perform any intimidating steps to test the device. Pat yourself on your shoulder as you accomplish success by following these easiest steps:

Wash Your External Drain Pipe to Free Off Debris and Dirt

Ensure that the pipe is directing the water away from the foundation. For this reason, what you can do is locate the sump pump in the crawlspace or basement. Remove debris to prevent it from getting clogged.

Ensure That the Pump’s Power Is Working

Test your sump pump by locating two cords that run to the outlet from your device. While one is the pump cord, another is your float cord. The former one gets plugged into the rear panel of the latter one. What you need to do is unplug them right away.

You must plug in your pump cord. As soon as you hear the running sound of the motor, it ensures that you have done the work successfully. Now, you can re-connect and plug the cords.

Put Water into the Pump Pit

When you see the sump pump having a single cord, you may test it by including five gallons of water into your pump pit. If the float rises and the pump turn on, you have successfully tested your device. And as the water gets pumped, it is imperative to ensure that the pump gets turned off.

The Aftermath of Your Test: What’s Next?

After you test your sump pump by following the aforementioned hacks, it’s time to determine the condition of your device. If the device doesn’t work properly even after performing these steps, it’s the right time to take professional consultation from a plumber.

Technically speaking, these devices last over ten years. However, if it gets to run most often, replacement after every 5 to 7 years becomes crucial. These devices are great in terms of emergencies.

Thus, taking time and testing the sump pump regularly is a quintessential step! It will prevent you from getting stuck in a filthy condition wondering about cleaning the clogged water!

You must test your sump pump twice every year –fall seasons and before the spring! And if you refrain from practicing it, you may experience critical water damage conditions.

In case of water damages resulting from your sump pumps, you can consult the deft team of professionals at Capital Plumbing. With round-the-clock customer support, the company focuses on water treatment, drain cleaning, water heater services.