Everyone in their house has experienced clogged drains at least once. It appears to be very dirty and messy, and your work eventually gets more intense if you don’t pay attention immediately. Clogged drains are caused due to either food debris or soap residue. If you know how to clean the clogged drains, then go ahead. But if you have never done it, and don’t know how to do it, then consider calling a plumber for drain services. To make your drain cleaning process easy, here are some tips on how to unclog sink drains.

Plunging the Sink Drain

Before trying anything, first, try to unclog the drain with a plunger. But before plunging your sink, remove as much water as possible. Plunging is useful to remove small clogs from the drains. You do not need to use any special kind of plunger, just a simple cup plunger with a flat rim. It helps to apply the required pressure on the drain to remove the clog.

Pouring Boil Water

Another basic tactic to unclog your sink drain is to pour in boiled water. Take a kettle or pot full of water and heat it on the stove. Until the water is getting heated, remove the water from the sink with the help of a mug. Then pour the hot boiled water directly in the sink drain. Later, turn on the faucet and check how the water is flowing off. If the situation is the same, then repeat the process again. Most of the time, it is effective, but don’t use this tactic if your drain is attached to PVC pipes. The boiling water can deform or melt the PVC pipes.

Putting Baking Soda and Vinegar

This is yet another cheap and easy way to unclog sink drains. You need to pour in a cup of baking soda in the sink drain, followed by an equal amount of vinegar. The solution will get mixed and produce bubbles. Put the stopper and wait for at least 15 minutes or more. Then pour hot water to see if the clog is cleared or not. If not, then you can repeat the process.

Using Plumber’s Snake

Plumber’s snake is a long plumbing tool used by professionals to provide drain services. It is long and has a coiled spiral snake at one end. You can put it in the drain, and once the snake obstructs the clog, you can crank the handle and pull out the debris. If you don’t have a plumber’s snake, then you can also use a coat hanger as a tool. It won’t reach as deep as a plumber’s snake, but it still can reach some clogs.

If your sink is still clogged after trying these DIY hacks, you must simply call plumbers in your area. If nothing works on the clogs, it means the clogs are tough and only require professional drain services.